Victory is mine!!!!
Jan. 27th, 2007 06:31 pm![[personal profile]](https://www.dreamwidth.org/img/silk/identity/user.png){kind=small}
prowler1971For anyone who really cares about the backstory... (or any of this story really)
Printer: The Beginning
The Return of Printer
Printer In 3D
Printer Goes Forth
A Fifth of Printer
I fixed the problem keeping tray 2 from printing. One of the plastic connectors had come up from where it was seated so the plug that plugs into it wasn't making a good connection. Only took a $6 screwdriver (I needed one with a bigger shaft... SHUT UP!) to get to the core of the problem. Was either that or the compressed air blew off the right spec of dust.
As for the duplexer, yeah, it's working great now. Must have been the screw that was inside of it. Yeah. I rock.
My next goal is networking the printer. This shouldn't be particularly difficult, but who knows, right?
Printer: The Beginning
The Return of Printer
Printer In 3D
Printer Goes Forth
A Fifth of Printer
I fixed the problem keeping tray 2 from printing. One of the plastic connectors had come up from where it was seated so the plug that plugs into it wasn't making a good connection. Only took a $6 screwdriver (I needed one with a bigger shaft... SHUT UP!) to get to the core of the problem. Was either that or the compressed air blew off the right spec of dust.
As for the duplexer, yeah, it's working great now. Must have been the screw that was inside of it. Yeah. I rock.
My next goal is networking the printer. This shouldn't be particularly difficult, but who knows, right?
